Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
FAQs
«
195
196
197
198
199
»
Question
Answer
Are the M and MA locks compatible?
Resolution:
No parts are compatible between the Falcon MA-Series and the obsolete Falcon M-Series.:
What is the distance between the two main prep holes on the H lock from Schlage?
Resolution:
The center to center distance is 4 inches.:
Can a Von Duprin EL device have pull side key access for loss of power situations?
Resolution:
A Von Duprin EL device can have pull side key access in cases of power loss when used with a trim with key over-ride to allow entry.:
What exit device will cover a 161 prep?
Resolution:
The 98/99 device is recommended to be used on 161 cut out.:
What special template (ST) is used with a 2030 closer and swing clear hinges?
Resolution:
Special Template ST-0568 is used to template a 2030 closer with swing clear hinges.ST2266-2 is used for the 2030 series closer being mounted with a swing clear hinge and -417 wood clips, wood ...:
What power supply replaced the Von Duprin PS861?
Resolution:
The PS902 power supply replaced the Von Duprin PS861 power supply.:
Where do I get the Machine ID for Schlage Express?
Resolution:
To get the Schlage Express unlock key, you'll be asked for the Machine ID in the registration page, the Machine ID can be found in the Schlage Express about page, follow the steps below to get to t...:
Is the back to back glass mounting available on the 8102/8103/8103EZ/8190 pull?
Resolution:
Back to back glass mounting is available on the 8103/8103EZ/8190 pull. The glass version has a shorter screw and also either felt or rubber bumper.:
Is AC monitor availabe on the PS900 series power supplies?
Resolution:
The PS900 series power supply has a AC green LED and a relay contacts (NC, C, NO) AC monitoring dry contact output to monitor the AC voltage.:
What is the KZ200AL?
Resolution:
KZ200AL is a 9" retaining nickel plated steel chain, used to secure the padlock when not in use. This item is no longer available. For a picture of the KZ200AL click here. :
«
195
196
197
198
199
»