Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: The PIB300-2D will work with an older VIP lock as long as the VIP lock has firmware version 2 or 3. The VIP's with firmware version 1 will not work with the PIB300-2D.The PIB m...:

What is the part number for the CX-RX switch?

Resolution: For solenoid driven Chexit devices shipped from the factory prior to 8-24-2015, the RX switch is no longer available. This part was discontinued in 2019.If the older version Chexit RX switch ...:

What is the standard backset for the ND locks?

Resolution: The default backset is 2 3/4" and the latch faceplate dimensions are 1 1/8" x 2 1/4". The latch supplied is the 13-047 deadlatch and 13-048 springlatch.:

Can you order EL1690 to replace an existing 1690 less rods and use the existing rods?

Resolution: The rods/latches are the same so they are interchangeable.:

Can I still get part number 185 19 series dogging cover?

Resolution: The current part number is 650303.:

Does Schlage offer a 7 pin FSIC?

Resolution: The Schlage Full Size IC core is 6 pin only. :

Will the 6210 electric strike work with a Yale 8700 mortise lock?

Resolution: The 210 electric strike operates with Yale 8700 mortise lock. See the Compatibility chart printed in Von Duprin Door Control and Security Hardware catalog.:

What grade is the AL lock?

Resolution: The AL lock is a Grade 2 lock ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.:

Is there a B250 series lock with a blank plate on the outside?

Resolution: No such product exists.:

What is Z-Wave technology?

Resolution: Z-Wave® is a mesh networking technology developed in 1999 to create a standard for wireless radio frequency (RF) communication for home devices. The key to the technology is that Z-Wave products ...: