Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: L9071 LV9071 (ANSI F32) Classroom Security Lock Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. Auxiliary latch deadlocks latchbolt when door...:

What is the L9080 by L283-263?

Resolution: L283-263 and L283-239 are obsolete part numbers that were used to specify "request to exit" on the L9000 and LV9000 locks. To specify RX on L9000 locks after January 2, 2017, specify the lette...:

What parts are modified on Schlage mortise locks for thicker doors?

Resolution: The L9000 lock can be ordered for doors greater than 1 3/4" thick. The allowable door thickness is dependent on the L lock function and how the lock is extended. All ...:

How does the MA531 operate?

Resolution: MA531 (ANSI F20) Apartment Corridor Door Lock Latch bolt operated by knob/lever from either side, except when outside knob/lever is made inoperative by buttons in face. Dead bolt operated b...:

wil PIB300 -2D work with VIP

Resolution: The PIB300-2D will work with an older VIP lock as long as the VIP lock has firmware version 2 or 3. The VIP's with firmware version 1 will not work with the PIB300-2D.The PIB m...:

What is the part number for the CX-RX switch?

Resolution: For solenoid driven Chexit devices shipped from the factory prior to 8-24-2015, the RX switch is no longer available. This part was discontinued in 2019.If the older version Chexit RX switch ...:

What is the standard backset for the ND locks?

Resolution: The default backset is 2 3/4" and the latch faceplate dimensions are 1 1/8" x 2 1/4". The latch supplied is the 13-047 deadlatch and 13-048 springlatch.:

Can you order EL1690 to replace an existing 1690 less rods and use the existing rods?

Resolution: The rods/latches are the same so they are interchangeable.:

Can I still get part number 185 19 series dogging cover?

Resolution: The current part number is 650303.:

Does Schlage offer a 7 pin FSIC?

Resolution: The Schlage Full Size IC core is 6 pin only. :