Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Is there a replacement for the Von Duprin 99/98 push pad plate that came off?

Resolution: You need to replace the push bar kit as the push pad plate is not available by itself. :

Is the 8827-F top soffit latch available as a part?

Resolution: The 8827-F soffit latch is available, part number 114141-00.:

Can you mount a 4041 Reg/Pa 180 degrees?

Resolution: Follow the 180° standard installation instructions to allow 180° of door opening. 5" hinge maximum.*Locate closer and shoe from centerline of pivot or swing clear hinge pin when used.:

Can a 1 3/4" thick panel be used in a fire rated transom frame with a transom bar?

Resolution: Transom panels are available in the following constructions: 1 3/4" thick panels with interior construction similar to an L-Series door installed into a frame either Without a transom bar - r...:

What replaced the PS873-K-2-BB?

Resolution: PS914-K-2RS-BBK replaces the old PS873-K-2-BB.:

Why is my PS873 outputting 27 volts?

Resolution: If PS873 power supply provides more than 26.4VDC replace the power supply with PS914 power supply.:

Do we still sell a pullman bottom latch for the old 18-V?

Resolution: Falcon does offer a pullman style (less deadlocking, less retention) top latch for use with the Falcon 24-V, 25-V, the Falcon/Monarch 19-V, and the discontinued Falcon/Monarch !7-V, 18-V, and XX-V ...:

What screw pack comes standard with LCN closers?

Resolution: The standard screw pack for most LCN (mechanical) closers is the SRT screw pack.:

What is the maximum glass light size on a 90 min (1 1/2 hour) fire rated door?

Resolution: Standard listed wire glass: one (1) light with 100 in2 per door leaf max.Firelite or other appropriately listed glass:• FM maintains one (1) light with 100 in2 per door leaf max.• UL &...:

Can you hardwire a 2670 and not use the PT-790?

Resolution: The PT-790 is the pluggable power supply and is required if you want to hardwire the 2670 Guard X.: