Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What is the part number for a B462 tailpiece?

Resolution: The B462 6pin 1 3/4" thick door tailpiece part number is B202-369.:

Resolution: The 710095-00 (85445-900) and 84570-900 are the older Sr. Swing analog (non-digital) control. It is replaced by the current Sr. Swing digital control box. If you need to replace an old ...:

Can you convert a 4040SE with a 120 volt track (solenoid) to a 24 volt track (solenoid)?

Resolution: You can not convert an SE track to a different voltage in the field as the "solenoid " in a 4040SE track is not field replaceable. The complete track will need to be replaced. :

Does Von Duprin supply the 9875, 9975, 9875-F and 9975-F mortise exit devices with NL-OP trim function?

Resolution: For night latch function with pull by others, the 98/99 series mortise exit device should be ordered as NL less trim, e.g., 9875NL-L/TRIM. We will furnish a device only, and the mortise cyl...:

Can you get Avalon lever for 25 series lever trim?

Resolution: See 24 and 25 series trim section in the Price Book.:

Can you get a metal cover on a 1461?

Resolution: A designer series metal cover is an option with the 1460 series closer, the part number is, 1460-72DS1.Adapter Kit used to mount cover to the closer – part number: 1460-3373. ...:

Can you use electric strikes on a RM170?

Resolution: There is no room inside the mullion to support the e-strike nor any top electrical mullion fitting to allow a wire harness to pass through.:

Why can't I order an AD-Series or CO-Series mortise deadbolt with a classroom/storeroom (70) function

Resolution: * NOTE: the AD300/400 devices simply communicate the change in Deadbolt Position status to the Host software. The software then decides what action should or should not be taken at the device. :

Do we have a Schlage conventional retrofit cylinder for Yale locks?

Resolution: Standard Schlage cylinders will not fit in Yale locks, but Schlage does offer special retrofit cylinder that, when ordered, can fit into specific Yale locks. See below for retrofit options. ...:

How close can the top hinge be to the top of the door?

Resolution: The minimum top and bottom butt hinge locations are as follows: To the hinge centerline: 4 1/2" and 5" hinges = 5 3/8" is the minimum location from top of door to centerline of the first hi...: