Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What power supply for use with 2 EL devices and a Norton AO?

Resolution: PS914 x 900-4RL power supply should be used.:

Do we offer pullman latches for 98/9927 surface vertical rod exit devices?

Resolution: The pullman latches for 98/9927 part number is 050402.:

Resolution: QELA motor assemblies that shipped after December 8, 2014 do not require resetting.QEL motor assemblies shipped prior to December 8, 2014, you can calibrate the QEL device by pressing the button on...:

What are the part numbers for the end case and latch case springs for the 88 rim?

Resolution: The part number for 88 rim end case spring is 090003-00 (PKG of 2) or 090080-00 (PKG of 10) and latch tail spring is 050393-00 (PKG of 10).:

How do you wire a Sr. Swing into the fire alarm system when you want the door to hold open all the time and close with fire panel signal?

Resolution: The fire alarm contact (N.C.) must be wired in the 120VAC power feed to remove power from the Sr. Swing to allow it to close with a fire alarm signal. The hold open signal will have to be removed a...:

Can a 4041 EDA be mounted top jamb?

Resolution: The 40401/4040XP closer with optional EDA arm has to be mounted parallel arm on the push side of the door.:

Can a 237L LBR be used on a non fire rated opening?

Resolution: The 237L can't be used as a LBR on fire or non fire rated openings:

How small a door opening can the 98/9927L-F be installed?

Resolution: A standard 98/9927/F or 98/9947/F device can be cut down to fit a 26 inch minimum door opening. :

What is the part number for the L9000 lock solenoid?

Resolution: The replacement solenoid for the Schlage L-Series mortise lock, part number L283-053, is obsolete and is no longer available. :

What power supply do I use with an L9000 electrified L lock?

Resolution: Applies to L9080EL/EU, L9082EL/EU (Discontinued) The Schlage L9080 EU/EL and L9082 EU/EL require 24 VAC/VDC with a peak current of 1.3 Amps at 5 to 10 second intervals and a holding ...: