Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Does Steelcraft use a 7 gage hinge reinforcement on their frames?

Resolution: Steelcraft uses a 7 gage hinge reinforcement for 4 1/2" and 5" butt hinges as standard on all frame series. The hinge reinforcement size for either 4 1/2" or 5" hinges (standard or heavy duty hing...:

Are 12 gauge reinforcements available on Steelcraft frames?

Resolution: Steelcraft does offer the following optional 12 gauge reinforcement for frames:ASA strike (4 7/8" ANSI A115.1-2)Regular, Parallel Arm, or Top Jamb Closer reinforcementsContinuous Hin...:

Are multiple narrow lights available?

Resolution: Yes. Multiple glass lights are available on specific door series as a special option as noted below: L-Series and SL-Series: Core options - Standard honeycomb, polystyrene, polyurethane Lig...:

What is the part number for the old 873 BB board only?

Resolution: The part number for the old 873 BB board only is112702-00.:

Where are the PS914 instructions?

Resolution: The link to the specific sheet can be found by clicking here: http://us.allegion.com/content/dam/allegion-us-2/web-documents-2/InstallInstructions/Von_Duprin_PS914_Power_Supply_Installation_I...:

Will Von Duprin Supply an RX switch in the Pneumatic 33A, 35A, 98, or 99 exit device?

Resolution: Von Duprin will supply an RX switch or the LX switch in the pneumatic exit device. Normally the pneumatic device is used in an intrinsically safe area and the RX switch and the LX switch&nbs...:

Is the 9447F x 9475F fire rated for 3 hours?

Resolution: The 9447F x 9475F devices are not tested for fire rated openings. :

Are the baseplates and pushbars interchangeable between the 33A and 99 devices?

Resolution: The baseplates and pushbars are interchangeable between the 33/35A and 98/99 devices. :

Can the new E conversion kit be used on the 996 L CV trim?

Resolution: The E conversion kit will work on any 996L trim.Part number is 050672 for the E conversion kit for Rim or Vertical rod trims and 050673 is for mortise lock trims.:

Is there a Von Duprin conversion kit to change mechanical to electric latch retraction EL in the field?

Resolution: Followings are the list of the electric latch retraction EL/HDEL (hex dogging), QEL (quiet) kits: 114317-00 QELA Mod. Conv. Kit 040061-00 QELA Mod. Conv. Kit...: