Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Why is the L0170 not available in the L escutcheon design?

Resolution: The Schlage L0170 is not available with the L escutcheon design because due to the narrow size you cannot fit the mounting plate underneath. The mounting plate must sit on a "diamon...:

Will an Everest key operate a Primus cylinder?

Resolution: Primus cylinders can only be operated with a Primus key.:

Will the Von Duprin PS902 power supply operate the QEL device?

Resolution: The Von Duprin PS902 power supply will operate the QEL device as long as you also use the 900-2Q board for devices shipped prior to September of 2012. After July of 2012, the 900-2RS boa...:

Is there a rebuild kit for the 6111?

Resolution: Kit 050942-00 contains springs, pin, and latch bolt.:

What is the part number for the 19 centercase cover?

Resolution: 19-R part# 650384 19-V part# 650385:

What is the difference between an SC80 and an SC81?

Resolution: As of Sept 2010 SC81 models are adjustable 1-6, the SC80 model was discontinued.:

What is the part number for the HD EL conversion kit for Von Duprin devices?

Resolution: HD-EL conversion kit for 3 feet exit device is 050384-00 and for 4 feet is 050385-00.:

What can I use instead of the EDA with 145 shoe?

Resolution: The 419 panel adaptor is the replacement for both the obsolete 145 shoe, and 418 panel bracket (both were made obsolete in 2009). The 419 panel adaptor is 4" wide, 2" tall, and projects 3". ST-069...:

How is the Von Duprin LX kit different than the EL - LX kit?

Resolution: The Von Duprin LX kit would have a rod included in the kit. The EL-LX switch kit does not include the rod as the EL dogging rod is used.:

Can Schlage's Longitude or Latitude lever be put on Von Duprin trims?

Resolution: The Schlage Longitude and Latitude levers are not compatible with the Von Duprin trims.: