Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What are the standard hinge locations for a Steelcraft 6'8" frame with 2 pair of hinges?

Resolution: The hinge spacing (between hinges) for a 6'8" door or frame with 2 pair of hinges is 19 61/64". Frame Locations - from the underside of head to the centerline of each hinge is: 9 3/4" to c...:

Is the Cush Shoe Support (-30) the same for all of LCN closers?

Resolution: For LCN Cast Iron Closers, the 4050A, and Falcon SC closers it is (1 3/4") wide, (1 1/2") tall and (1 1/2") deep For 1250 and 1450 LCN Alum body Closers it is (2") wide, (1 1/2") tall and (1 1/2"...:

What does BA mean when ordering a Monarch device?

Resolution: "BA" stands for basic assembly or what is now referred to as Exit Only(EO):

Is the 98/9927/47-F LBR with the auxiliary bolt double egress opening UL listed?

Resolution: The 98/9927/47-F-LBR with auxiliary fire bolt, double egress opening, is UL listed.:

Are parts available for a very old 88 device?

Resolution: The 88 series exit devices have not changed. All parts are available except for parts manufactured from aluminum and stainless steel. These parts are now only available in a brass or bronze substr...:

What is the part number for a Von Duprin EL solenoid?

Resolution: EL94/95 solenoid and plunger part number is 113189.:

Can the 88 device be ordered as NL-OP?

Resolution: You would have to order the device as 88NL less trim, the device will be shipped as an 88EO. The EO device has an NL cam to accept a rim cylinder tailpiece. :

Will the E 996 trim work with the Von Duprin Chexit device?

Resolution: You can use the E996L trim with 98/99 rim or vertical and E996L-M with mortise Chexit device.:

What cores are offered for insulated doors?

Resolution: Insulated Core Options: Steelcraft L-Series doors are available with the following 2 optional insulated cores: Polystyrene slab - this core is available in non fire rated and fire rated doors...:

Will CO-200/250 accept prox and magstripe?

Resolution: CO-200/250 will take prox and magstripe: