Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Did we have wood grain finishes on the 33/35's?

Resolution: On the old series 33/35 exit devices we did offer the wood grain finishes. We do not offer the wood grain finishes any longer with new series exit devices.:

What is the part number for the 1490 push sticker?

Resolution: The part number depends on the handing and finish of the device: RHR, US28 is #4270107321 LHR, US28 is #4270107323 RHR, DC13/DC35 is #4270107320 LHR, DC13/DC35 is #4270107322.:

What does the Von Duprin pushpad length have to be on a 48" device?

Resolution: Von Duprin pushpad on 48" exit device is 24" long.:

When did LCN quit making traditional potbelly style closers?

Resolution: The LCN "Traditional" Potbelly series closer line was discontinued in 1980. Unfortunately there is no direct replacement for these old units. Would need to replace with...:

What is the difference between Von Duprin 98/9947 and 98/9948 concealed vertical rod devices?

Resolution: They both use Template # 10320_c:

Can you get just the base plate for Von Duprin devices?

Resolution: Other than the ones in the EL Conversion kits the baseplates are not a saleable item/part to the devices.:

Is there an electric lock/unlock function for the Von Duprin 360 L trim?

Resolution: The E360L trim will provide this function.:

What are the standard hinge locations for a Steelcraft 6'8" frame with 2 pair of hinges?

Resolution: The hinge spacing (between hinges) for a 6'8" door or frame with 2 pair of hinges is 19 61/64". Frame Locations - from the underside of head to the centerline of each hinge is: 9 3/4" to c...:

Is the Cush Shoe Support (-30) the same for all of LCN closers?

Resolution: For LCN Cast Iron Closers, the 4050A, and Falcon SC closers it is (1 3/4") wide, (1 1/2") tall and (1 1/2") deep For 1250 and 1450 LCN Alum body Closers it is (2") wide, (1 1/2") tall and (1 1/2"...:

What does BA mean when ordering a Monarch device?

Resolution: "BA" stands for basic assembly or what is now referred to as Exit Only(EO):