Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

Wireless PIM-485 Loss of 485 Connection

When using a PIM-485 configured with the RSI protocol and the PIM-485 loses the 485 connection to the ACP Panel, the following result will occur. If the PIM-485 is not polled by the ACP for more then 5 seconds then the WAPM's linked to the PIM will go into degraded mode if enabled, either fail safe or fail secure or use the cache. If no degraded mode is enabled, then the unit will remain in current state and not accept any credentials.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.