Will the Symbol LS9203 scanner work with the HP3000
You will need to do some programming on it as well as changing the Handpunch configuration. The barcode reader needs to have an Asterisk programmed for both the prefix and suffix characters. Once you have the scanner programmed, you can do a simple test by connecting the scanner to the PC, and run Hyperterminal. By default, if you scan a card, you may see as an example: 123456 This is NOT programmed. Once you program the scanner and scan the same card, you should see: *123456* (Note the leading and trailing asterisk character). The HP3000 will aslo need to be programmed with config# 10790, using the FConfig software utility. Recommended conmmunication method is by RS485 with a data converter. The 10790 configuration changes the RS232 communication port on the HP3000 in order for it to communicate with the scanner.
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES
OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO
YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE
USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS
MADE AVAILABLE THROUGH THIS SITE.