Will the EPT-10-EPT-2, PNT-1 work if the door and frame cutouts are not even?

The Von Duprin EPT2 & EPT10 Power Transfer Installation Instructions (allegion.com) and Von Duprin Power Transfer Unit EPT2 EPT10 and PNT1 Template (allegion.com) both indicate that the CL (Centerline) of the EPT on the Frame MUST align with the CL of the EPT on the Door and that the mounting screws are also lined up so that the two parts of the EPT would be aligned both horizontally and vertically.

 If an EPT prep is misaligned between the door and frame, it could cause the EPT to interfere with the swing of the door as it opens or closes..


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.