Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

When will the AD and CO locks start flashing LOW Battery?

When the battery level is LOW the AD & CO series locks will flash the Schlage key nine times before unlocking.

When the battery level is Critical the AD & CO locks will default to the selected "Battery Fail Mode" 1) As-is; 2) Secure/Lock; 3) Unsecured/Unlock... which are options in the SUS Edit TAB.

 



 
AD-Series & CT5000
4 Battery Holder
Low battery threshold is 4.8 volts
Critical battery threshold is 4.4V


8 Battery Holder
Low battery threshold is 9.6V
Critical battery threshold is 8.8V
Coin cell = full is 3.0V3.0V, low is 2,7V 2.7V
The AD400 and AD300 do not use the coin cell and will not report the coin cell battery low.



CO-Series (4 AA Battery ONLY)

AA Batteries = Full 6.2 V, low battery is 4.2V, critical is 3.8V

Coin cell = full is 3.0V, low is 2.7V




DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.