What smart locks can be connected to my Ring alarm system?

Here is a list of compatible locks that can be integrated/linked to the Ring App. 

Z-Wave products:

 BE468ZP, BE469, BE469ZP are z-wave integration products and must be paired to a ring alarm base station. 
 

To add Z-wave device: 

1. Open the menu, then tap Devices.
2. Tap Set Up a Device (+).
3. Tap Security.
4. Choose the type of Alarm device you want to add.
5. Under Add Device, choose the specific type of device you want to add.
6. Review the additional instructions, then tap Add Device. Your Base Station will start listening for a new nearby Alarm device.
7. Follow the remaining instructions to add the Alarm device.
    

Encode products: 

BE489WB, FE789 

Steps to pairing encode products: 

1. Open your Ring App
2. Tap the three-lines on the upper-left side of the screen to open the side menu
3. Tap Set up a device
4. Tap Locks & Access Controllers
5. Tap Schlage Encode Lock
6. Tap Begin Setup
   • You will be taken to the Schlage information page.
7. Tap I have an account.
8. Connect your Schlage account to your Ring account.
9. Tap I agree when asked if you will allow your Schlage app to be connected to your Ring App.
10. Enter your User ID and Password to log in to your Schlage account.
    • Your Schlage account is now connected to your Ring account. Once your Schlage device is configured in the Schlage app, you can now configure it in the Ring app.
11. Choose the address where your Schlage lock is located.