What is the difference between the 4040, 4010, 4020, and 4110 series closers?

4040XP Series (4040 DEL) is a universal closer. *(see note)

  • Non Handed closer. Can be mounted on a RH or LH door.
  • 4041XP - Adjustable size 1 to 6.
  • Can mount push side or pull side of the door.*(see note)
  • Non Handed arms with the exception of HEDA arms are handed.
  • Non Handed cover.
  • Handed metal cover.***
  • The mounting hole pattern of a 4040XP/4041 is a "staggered hole pattern" 2-1/4" vertical center of top corner to center of bottom corner mounting holes, and 5" horizontal center of top corner to center of bottom corner mounting holes.

4010 Series is a handed closer. **(see note)

  • Regular arm pull side mount closer.
  • Same closer body as 4020.
  • 4011 - Adjustable size 1 to 5.
  • 4016 - Size 6 only.
  • Regular arms are Non Handed. The Hold open arms are handed.
  • Non Handed plastic cover. (plastic cover same as 4110)
  • Handed metal cover.***(see note)
  • The mounting hole pattern of a 4010 series is 2-1/2" vertical from center to center of mounting holes, and 6" horizontal center to center of mounting holes.

4020 Series is a handed closer. **(see note)

  • Regular arm push side top jamb mount closer. (longer rod and shoe than 4010)
  • Same closer body as 4010.
  • 4021 - Adjustable size 1 to 5.
  • 4026 - Size 6 only.
  • Regular arms are Non Handed.  The Hold Open arms are handed.
  • Handed plastic cover. (plastic cover different than 4010/4110)
  • Handed metal cover.***(see note)
  • The mounting hole pattern of a 4020 series is 2-1/2" vertical from center to center of mounting holes, and 6" horizontal center to center of mounting holes.

4110 Series is a handed closer. **(see note)

  • Parallel arm push side mount closer.
  • 4111 - Adjustable size 1 to 5.
  • 4116 - Size 6 only.
  • EDA, Cush, and HCush are Non Handed arms.  The HEDA arm is Handed.
  • Non Handed plastic cover. (plastic cover same as 4010)
  • Handed metal cover.  ***(see note)
  • The mounting hole pattern of a 4110 series is 2-1/2" vertical from center to center of mounting holes, and 6" horizontal center to center of mounting holes.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.

Other users ask

Question