Electric Power Transfer (EPT) provides a means of transferring electrical power from a door frame to the edge of a swinging door. The units are completely concealed when the door is in the closed position, and are ideally suited for installations involving abuse or heavy traffic.
Two models are available; EPT-2, two 18 gauge wires and EPT-10, ten 24 gauge wires. The EPT-2 and EPT-10 are UL listed as “miscellaneous door accessory.”
Pneumatic Controls
PNT-1 is available for pneumatic latch retraction exit devices. Appearance and dimensions are identical to EPT models.
UL listed for use on fire doors.
Door Applications
Up to 5˝ butt hinges - 180° Swing
5 1/2˝ butt hinges - 130° Swing
6˝ butt hinges - 110° Swing
3/4˝ butt offset pivots - 180° Swing
Not for use with swing clear hinges or center-hung pivots.
SPECIFICATIONS
Housing — 9˝ x 11⁄4˝ x 15⁄8˝ (229mm x 32mm x 38mm)
EPT-2 — Two 18 gauge wires Up to 2 amps @ 24VDC, with a16 amps maximum surge
EPT-10 — Ten 24 gauge wires, up to 1 amp @ 24VDC, with a 16 amps maximum surge
PNT-1 5 ⁄32˝ Tubing
TO ORDER, SPECIFY:
1. EPT-2, EPT-10 or PNT-1
2. Finish, SP28 or SP313
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES
OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO
YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE
USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS
MADE AVAILABLE THROUGH THIS SITE.