Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

What door prep is required for Falcon Single Dummy MA12 with rose trim?

The Falcon MA12 Single Dummy trim does not have a lock body thus no mortise pocket.

The following holes should be drilled based on the trim type:

  • For rose (sectional) trim, drill the hole for lever spindle only.  This is marked as hole E on the MA Escutcheon Template.  Do NOT drill through the door.  This is single side door prep only.  Lever is surface mounted using two - combination (wood/machine) screws.  No through bolts are utilized.  
  • For escutcheon trim, drill the hole for lever spindle spindle only.  This is marked as hole E on the MA Escutcheon Template.  Do NOT drill through the door.  This is single side door prep only.  Lever is surface mounted using two - combination (wood/machine) screws.  No through bolts are utilized.  Escutcheon trim is also suface mounted using two combination (wood/machine) screws.  

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.