The older KP70+ Series keypad is NOT compatible with the CT5000.
The CT5000 requires that keypad data be transmitted in 2-wire Wiegand (Data1/Data0) or Magnetic (Clock & Data) format.
The KP70+ Series readers use a separate wires for each keypad button and are NOT compatible with the CT5000.
The older CR90 is NOT compatible with the CT5000. The CR90 reader uses a separate wires for each keypad button and is not compatible with the CT5000.
They can use the SXF2110P-K prox and keypad combo reader or the SMR20 Mag and keypad combo reader. ( Must order the SMR20 as 12VDC)
The Electronic Keypad SEKPDMWG or SEKPDWG can also be use but will need to be enter as a 26 bit Credential.
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES
OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO
YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE
USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS
MADE AVAILABLE THROUGH THIS SITE.