Isonas IP-Bridge – What can be connected to the “Downstream” ethernet terminal?
i. The “Downstream” terminal of the IPBridge is intended for use to connect to up to 2 downstream IPBridge devices.
1. This terminal does NOT pass PoE to downstream devices by default. There is a jumper on the main board that can be moved across pins 2 and 3 that will enable PoE to pass through.
2. Note: the POE power is shared by ALL IPBridges and, if connected, DC-powered devices via the DC+ terminals. External power supply may be needed for locking hardware instead so as to not overdraw the PoE capacity.
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.