Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

What additional screws are needed when mounting a 1250 or 1450 in a Parallel arm mount with a coordinator?

Resolution:

Qty of 5 of DP#72643 – ¼-20 X 12 mm (.472”) Pan Head.

The standard screws for the 1250 and 1450 are pan head so these additional screws need to match so they too are pan head. The additional screws are needed to be able to mount the arm shoe to the mounting bracket by other (BX or MB) without going thru the bracket and into the coordinator. These screws are 1/2" shorter than the standard screws for mounting the shoe.

1250 EDA w/ coordinator use ST5002

1250 Cush w/ coordinator use ST5030

1450 Reg w/PA w/coordinator use ST5024

1450 EDA w/ coordinator use ST5023

1450 CUSH w/ coordinator use ST5021

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.