If you’re having trouble connecting your Schlage Encode Series Smart Wi-Fi Deadbolt, including the Schlage Encode and Schlage Encode Plus, to your Wi-Fi network, the issue may be related to network settings, signal strength, or power.
When attempting to pair your Schlage Encode Series Smart Lock to Wi-Fi, the lock may fail to connect due to one of several common causes. If the connection fails, you may experience commissioning errors or pairing interruptions. These issues can often be resolved by addressing network or hardware-related factors.
The maximum password length supported by the Schlage Arrive Smart Lock is 24 characters.
Passwords exceeding this limit will cause pairing errors.
Certain special characters (e.g., $ and &) are not recognized by the Schlage Home App.
Including these characters in your password will prevent successful pairing.
A space in the Wi-Fi password will result in a commissioning error.
To resolve the issue, update your Wi-Fi password to meet the following requirements:
Ensure the password is 24 characters or fewer.
Avoid using unsupported special characters such as $ or &.
Remove any spaces from the password.
Once the Wi-Fi password has been updated, attempt to pair the lock again.
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.