Rabbeted thresholds like the 65 with the rubber seal may need to be cut and trimmed to size in the field. • Please remove the rubber before cutting • The rubber may have dabs of glue on it placed by the factory to help hold it in place. • Do not leave the rubber installed and 'pull' it before cutting - This can result in stretching, then the material will shorten back leaving unsealed portions of the threshold • Remove the neoprene from the threshold before installing. Removal may be difficult if it has glue on it. • Size it and cut it. Reinstall.
To search below, Press CTRL F, when the search pops up, enter the base model number without the finish code, or search manually. • Model Numbers: Rubber Part Number:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES
OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO
YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE
USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS
MADE AVAILABLE THROUGH THIS SITE.