RSI Mode: In this mode, the Gateway communicates with an access control panel (ACP) and alliance partner access control software to control the system. Power is supplied by the ACP power connector (12 or 24V) or the wall power supply. Data is supplied by either 2 or 4 wire RS-485 connection from the ACP.
All updates to the lock and programming is saved on the controller. Cache mode can be used in RSI mode.
IP Mode: In this mode, the Gateway communicates with an IP-based host. Power is supplied by either POE on the Ethernet cable or the wall power supply that is included with the Gateway. Data is supplied over Ethernet.
The locks’ programming are saved at the lock, all decisions are done at the door. IP mode has no cache mode available.
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES
OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO
YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE
USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS
MADE AVAILABLE THROUGH THIS SITE.