As of firmware package release AD.A.130 (CT5000 firmware 2.8.0), the CT5000 controller can now support 75-bit PIV card output from a reader. This makes it compatible with PIV credentials programmed into Schlage Express.
Any CT5000 running firmware prior to this will not support PIV. However, if a CT5000 is updated using firmware package AD.A.130 or later, the unit will now be compatible.
Note: The MT20 enrollment reader can be used to enroll PIV credentials into express. The reader will need to be configured with the CE-401-061 "Octal" configuration card (shipped with all new MT20s). As the reader converts PIV to a 75-bit output by default, there should be no other configuration needed.
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES
OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO
YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE
USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS
MADE AVAILABLE THROUGH THIS SITE.