Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

Schlage Connected Lever FE599 (Discontinued) How to factory reset the lock

If you lose or forget your programming code, you can restore the factory default settings which will restore the default programming code and user codes.
Verify you have the original factory code from this sticker.  Caution!

DO NOT factory default reset your lock unless you have the default codes! Customer service CANNOT retrieve lost default codes!

Once you have your default codes handy, follow the directions below.
  1. Disconnect the battery.
  2. Press and release the Schlage button.
  3. The following steps must occur within 10 seconds:
  • Reconnect the battery: the indicator light will light green for one second.
  • Then, press and hold the Schlage button until the the indicator light is green and the lock beeps.
 
Now try entering one of the default user codes. If it does not unlock the lock, start over at step 2.
 
Performing a factory reset will not remove of exclude the lock from any Z-wave hub.  

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.