Procedure to Initialize a New Red Programming Key into a PED-1000 or PED-500
Procedure to Initialize a New Red Programming Key into a PED-1000 or PED-500. For this procedure utilize a user key that is valid in the unit, a new red programming key, and an HHD.
1. Present user key and the PED should flash green and unlock
2. While the green light is flashing present the new red programming key
3. Then press the Schlage button 5 times
4. Red LED remains on solid.
5. Present the new red programming key again, unit will lock and LED will flash red & green showing program mode.
6. Use an HHD to download the update into the unit
7. The new red programming key will then be saved as the current red programming key.
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES
OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO
YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE
USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS
MADE AVAILABLE THROUGH THIS SITE.