Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

Physical Vapor Deposition (PVD)-505

•Parts are placed in a vacuum chamber with a semi-precious metal “target”. (Zirconium nitride)
•A vacuum is created in the chamber
•The lock components & “target” are electrically charged with opposite polarities.
•An inert gas is introduced into the chamber, & a high bolt of electricity causes the “target” to atomize. A thin coating is deposited one molecule at a time adhering to the precise contour of the part.
•The internal temperature reaches about 325 deg. F.
•A complete cycle in the chamber is about 45 min.

The coating thickness is about 40 microns .3-.5 millionths of a meter.


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.