On the JDE265 is it recommended to change the programming code (123456)?

It is highly recommended that you change the programming code for the JDE265 if you programming code is 123456, Below are the instructions on how to change the programing code:

  1. Press the set button (red button underneath batteries) for one second or for one beep - the lock button will turn green
  2. Enter the six digit programming code 123456 - the lock button will turn red
  3. Press the lock button - the lock button will turn red and green
  4. Press the number one - the lock will turn red
  5. Press the number zero - the lock button will turn red
  6. Press the lock button - the lock button will turn red and green
  7. Enter the new six digit programming code - the lock button will turn red
  8. Press the lock button - the lock will turn red and green
  9. Lock button will stay red for a few seconds and then turn an amber color for about four seconds and then turn off.

If you have trouble, please contact us at 888-805-9837 or email [email protected] for further assistance.


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.