Motorized Chexit Troubleshooting: When motorized Chexit device tries to arm, pushpad remains unlocked and internal alarm is pulsing fast after 2 seconds.

1.Chexit motor cable is disconnected. This cable should connect the Chexit module to the motor assembly.

2. Chexit motor cable has an open connection,  or wires are in wrong order.

3. Chexit motor assembly is defective.

4. Latch bolt can't extend on Chexit rim and vertical devices. Make sure door is closed and latches are extended when testing the device.

5. On any Chexit device, the push bar is held in.


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.