Is handing required for the FE595?

Handing is not required for the FE595 as this lock has universal handing. 

If the orientation of the levers needs to be swapped:
Step-by-Step Instructions to Switch Levers

  1. Insert the Pin Wrench:

    • Use the pin wrench to insert into the hole on the lever.
    • Push in and hold the pin wrench.
  2. Remove the Lever:

    • While holding the pin wrench, pull the lever off.
  3. Repeat for Other Side:

    • Repeat the process to remove the lever from the other side of the door.
  4. Switch the Levers:

    • Swap the interior and exterior handles to correct the orientation.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.