Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
How was the Falcon M series lever trim attached?
The Falcon M series lever trim was attached using a hex screw (42) to hold the lever (13) in place. The rose and the escutcheon were held in place with a threaded collar (2) that threaded onto the inner Insert (7). The the inner insert was attached to the outside lever assembly with two screws.
Too remove the lever trim, you first had to remove the lever hex screw, pull the lever oof, then unthread the collar and remove the rose or escutcheon. Then you could access the two mounting screws (38) holding the lever assemblies together.
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.