Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

How to Exclude a Schlage Connect Lock from Ring

If your Schlage Connect lock is paired with the Ring Alarm Base Station and you need to remove it, you must perform an exclusion process. The steps for exclusion may vary depending on the hub manufacturer.

Steps to Exclude Your Lock from Ring:

  1. Open the Ring App.
  2. Tap the three lines in the upper left-hand corner.
  3. Select Devices.
  4. Navigate to Security and tap the Alarm Base Station.
  5. On the next page, tap the Base Station.
  6. In the top right-hand corner, tap Device Settings.
  7. Go to Tools and tap Advanced Options.
  8. Under Protocol Adapters, tap Z-Wave.
  9. Tap Remove Z-Wave Device.

  10. Put your Schlage Lock in Exclusion Mode:

    • BE469ZP: Press and release the red button on the back of the lock.
    • BE469, BE469NX, BE469IR, BE469WK, BE468: Press the Schlage logo, enter the 6-digit programming code, then press 0.
    • FE599 and BE369 (Discontinued): Enter the 6-digit programming code, press the Schlage button, then press 0. 

    For further information on Ring Exclusion, click here. 

    For more information on the Schlage Connect general exclusion, click here.


     


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.