Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

How to delete ALL user codes stored in my Schlage Connect lock

WARNING: These steps will remove ALL user codes from the lock. User codes cannot be retrieved after they are deleted. To remove only certain codes, follow these steps here.
  1. Press the Schlage button at the top of your lock’s touchscreen.
  2. Enter the 6-digit programming code (Do not know your programming code? See how to locate it here.)
  3. Press 6.
    Before continuing, make sure you have your lock’s default access codes available.
  4. Enter your programming code again.
  5. A green check mark indicates success along with 2 blinks + 2 beeps
 
For more help programming and using your Schlage Connect lock, visit the Schlage Connect FAQ page.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.