How to adjust a 4010 hold open arm?

 The correct method (process) for setting the hold open is:

  1. The 4010 hold open arms are handed, verify correct hand arm. (R or L stamped on main arm)
  2. Loosen the hold open nut.
  3. Opened the door to 5 degrees less than the desired degree of hold open.
  4. Tighten the nut securely. 
  5. Push door open to engage hold open.
  • 4010 hold open arm part number is  --- 4010-3049
  • 4010 hold open adjustment wrench part number is --- T- 1157.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.

Other users ask