Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
How to add codes to Schlage Keypad and Touch Locks?
*New user code must be different from the first four digits of the programming code*
1. Enter programming code (6 digits).
Wait for 3 orange lights and 3 beeps.
2. Press Schlage
The keypad will light up.
3. Press 1.
Wait for 3 orange lights + 3 beeps.
4. Enter new user code (4 digits).
Wait for 3 orange lights + 3 beeps.
5. Enter same new user code.
Success! 1 green light + 1 long beep.
If you have a Dexter Keypad Lock, please reference the steps below:
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.