How long does updating firmware on a Schlage Reader Controller take?

The LED will flash amber/yellow while the firmware package is being downloaded.

After the firmware package has been downloaded, the device will disconnect from the server.

The LED will alternate flashing green and red during the update process.

When the update ends the devices will beep three times.

The entire process takes approximately 8 minutes.

*If a credential is presented while the firmware package is being download, the LED will stop flashing amber/yellow, but the package will continue downloading.
*The device will not be able to read or approve credentials while updating the firmware package.


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.