Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

How is the rose installed on a Falcon MA mortise lock with Latitude (LAT) or Longitude (LON) trim?

Falcon MA mortise lock levers are typically designed so that the rose or escutcheon can be slipped on over the lever and spring cage and then secured in place.  

However, the Latitude (LAT) and Longitude (LON) lever designs do not permit the rose or escutcheon to fit over them.  These two levers are equipped with set screws so that the lever can be separated from the spring cage portion of the assembly. 

  1. Secure the spring cage assembly to the mounting posts and then to the door.  
  2. Install the rose or escutcheon over the spring cage assembly.
  3. Attach the lever to the spring cage assembly using the set screw

See the following snip from the Falcon MA installation instructions illustrating this process.


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.