How is the nuisance alarm and delay set on the CX Device?

To set the nuisance delay and alarm on the Chexit devices shipped after 8-24-2015 with motor driven, remove power from the module and set dip switches 7, 8, and 10 as needed for proper nuisance delay and alarm. Nuisance delays available are either 1, 2, or 3 seconds.

 

  • Switch 7 & 10 "ON" = 1 second nuisance delay and alarm
  • Switch 8 & 10 "ON" = 2 second nuisance delay and alarm
  • Switch 7, 8 & 10 "ON" = 3 second nuisance delay and alarm

 



To set the nuisance delay and alarm on the Chexit devices shipped prior to 8-24-2015 with solenoid driven, remove power from the module and set dip switch 5 & 6 to the on position. Nuisance delay is only one second.


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.