The Schlage Custom Combined Interior (FC21) function can be utilized as a privacy lock (bed/bath) when the privacy pin is utilized and a passage lock (hall/closet) without the pin, depending on user preference. The Combined Interior function is factory-configured as a passage lock by default. Upon installation, if you do not install the privacy pin (included in every package), the lock will remain as a passage function. You can save the privacy pin to convert the lock from passage function to privacy function at a later date, and even back again.
To configure the lock to operate as a privacy function, simply install the privacy pin as shown here.
When the lock is a privacy function and locked, rotating the inside knob or lever will auto-unlock the door. You can also use the Emergency Unlock feature with instructions here.
If you want to change from privacy (bed/bath) to passage (hall/closet) function, simply rotate the privacy pin to the left 90 degrees and pull out of the lock, as shown here. Be sure to save your privacy pin.
To learn more about the installation of Schlage Custom Door Hardware, view the install video here.
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.