How does the door prep change from Gen1 to Gen2 of the Schlage L9000 mortise indicators?

When replacing Gen1 L mortise indicators with Gen2 L mortise indicators, some additional door prep will be required.  

  • If a cylinder function Gen2 indicator is being added to the lock, there is one additional hole that must be drilled.  The hole is 5/32" and is located above and to the right of the cylinder hole. 
  • If a thumbturn, privacy, or cointurn Gen2 indicator is being added to the lock, there are two additional holes that must be drilled.  First is the 1 ΒΌ" cylinder hole and second is the 5/32" hole above and to the right of the cylinder hole.  

Please consult the Gen2 templates which are available on the Allegion template directory.  Here's a sample template (e.g. LG201 sectional outside template) showing the required cylinder hole and the 5/32" hole.  Always utilize the correct template for your lock function and for the correct indicator location (outside, inside, or dual.)  

 

 


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.