Battery Jump Procedure: The emergency battery jump start can be used to unlock the door if the batteries are dead. WARNING: The lock will remain unlocked until you change the battery and relock the door.
1. Touch a new high-quality alkaline 9-volt battery to the contacts below the bolt throw.(There is no specific way the battery has to touch the connection points).
2. Wait for 1 red light and then 3 green lights with 3 beeps. (The lights are below the Schlage logo).
3. Present a valid credential.
4. Rotate the bolt throw away from the door edge.
5. Replace the batteries.
6. Present a valid credential and relock the lock to ensure proper lock operation. (The lock will remain unlocked until you change the battery and relock the door).
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.