How do you set up a 30-minute "Break Compliant" Lunch on a HP3000-XL?

Activate the capability at the reader using the TA Standoff Menu. First, activate the

T&A Mode (Explicit Punch) and then set the values needed in the TA Standoff Val Menu

a. To activate Explicit Punch

i. Menu 2, SET ID LENGTH, (enter desired ID length) T&A MODE SET, [Yes#]

To set TA STANDOFFs

Step 1: Go into Menu 5, TA STANDOFF VALS,

Step 2: Select OUT Code (TA Codes): These will be the type of punches which

will activate the lock out capability

*If no additional OUT codes are needed, enter 00, and go to STEP 3.

Step 3: Select the STANDOFF: This is how long, in minutes, the lock

out period will be active. (Set the standoff to be 30 - for a 30 minute lunch break.)

Step 4: Select additional OUT Code (TA Codes): Up to three codes can be

selected.

*If no additional OUT codes are needed, enter 00, and go to STEP 5.

Step 5: Select the STANDOFF: This is how long, in minutes, the last

OUT code is to be active.

Step 6: Select up to 3 BACK Codes: These (TA CODES) are the type of punches

that will be locked out until the timer has expired. Up to 3 can be selected,

but once completed, press 00.