How do you measure the length on the Allegion connect harness?

To measure the Allegion Connect harness, follow these steps:

1. Straighten the Harness
Lay the harness out on a flat surface, ensuring it is fully extended and free of twists or bends.
2. Identify the Connectors
Locate the connectors at both ends of the harness. These are typically where the harness plugs into devices or power sources.
3. Measure the Cable Length
Use a tape measure to measure the length of the cable from the tip of one connector to the tip of the other connector. Ensure your harness is straight and flat.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.