Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

How do you invert the cam on the back of a FSIC mortise housing for dogging applications?

To invert (or dog) the straight cam on the back a a FSIC mortise housing, you must follow the steps outlined below.

  1. Insert the FSIC core and remove the key. NOTE: It is important to have the core installed so the cam is not simply rotated 180°.
  2. Remove the cam screw on the back of the housing
  3. Remove the cam, invert the cam (rotate 180°) and reinstall
  4. Reinstall the cam screw

The video “Properly dog the cam on a Schlage FSIC” may be helpful.


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.