How do you create a toggle fob in Engage?

Follow these steps to create a new toggle credential:

1. Log in on the web portal and open the Users Tab
2. Select a current user
3. From the Users card, select Add Credential
4. The Add Credential card will display. Then Select Existing Credential tab will display by default. Select an existing credential from the list
5. Select the Credential Function from the drop-down list.
6. Click Save
7. Update fob using the MT20W (if you are using an MT20W), or Sync to the door to update the door file.

To change an existing credential to a toggle credential do the following:

1. Log in on the web portal and open the Users Tab
2. Select a current user
3. Click on the credential number assigned to the user
4. Under the Credential Function, select Toggle
5. Click Save
6. Update fob using the MT20W (if you are using an MT20W), or Sync to the door to update the door file.
 


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.