How do I setup the Schlage Sense (BE479) to work with a BR400 network adapter?

To begin pairing your BE479 and BR400 follow the steps below:

1. Enable Bluetooth for your device and disconnect any accessories currently connected
2. Ensure that your phone is connected to your 2.4G Wi-Fi network
3. Click the lock icon with the plus sign symbol on the top right hand corner in the Schlage home app 
4. Click "My lock looks different" 
5. Click "Schlage Sense" 
6. If the lock is already installed and has gone through the handing process (entering user code A and the bolt goes out then back in) click “yes, lock is installed”. If the lock has not been installed on the door please follow the on screen directions to assist you with installing your lock. 
7. Click “Set up with Schlage System”
8. Click “continue”
9. Enter the 6 digit programming code found on your programming guide (each lock has it's own code, so be sure to use the correct one)
10. Press the 'Schlage' button on the exterior side of the keypad, followed by the 6 digit programming code, then press '0' 
    - the app will display a loading screen then show step 4/4. 
11. Give the lock a location name > whatever access code you would like > Name your access code > click 'Finish' 
12. Allow the lock to complete its auto configuration: Open your door and click "I'm ready" 
     

Congratulations! Your lock has completed the initial pairing process with the application you are now ready to pair with the BR400 Network adapter. Please click the appropriate link below according to your device for the remaining steps to setup your BR400. 

Android 

IOS