How do I re-hand an auto door bottom

Only the 321 & 323 Automatic Door Bottoms (ADB) need to be re-handed by rearranging internal parts.  For these ADB's, you can remove the set screw from the side of the unit, then from one end (or the other) push the contents of the ADB out of the track.  Slide the contents back into the opposite end of the ADB.  When installed in the correct handing orientation, the plunger will push against the hinge side jamb.  Put the set screw back in and tighten.

All other models of ADBs can be reversed by installing them with the plunger oriented in one direction or the other.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.