Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
How Do I program the alarm on the Schlage Connect
The alarm comes pre-set to the Forced Entry setting and is ready to use. If you want to change it from Forced Entry to another alert setting, follow these simple steps:
1. Press the Schlage button for 2 seconds until it flashes. After you let go, the alarm will beep. (When the alarm first turns on, the light on the right side of the LED track will flash to indicate it is in the Forced Entry Alert.)
2. Continue tabbing the Schlage button to cycle through the different alert settings.
3. When the light flashes on the setting you prefer, stop tabbing. The alarm will automatically program to that alert setting.
Remember: The control pad for the alarm is located on the inside of your door.
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.