How do I obtain a non-standard release delay board for my Chexit?
We can ship the customer 15, 30, or 15 second BOCA Chexit modules for installation in a currently installed device.
To switch to any delay other than 15, 30, or 15 second BOCA requires a complete device replacement due to a difference in the UL label.
Cannot replace an old style (solenoid driven Chexit) module with the new style (motor driven Chexit) module.
New Chexit module must be ordered with the correct signage for the module’s release delay (e.g. 15 seconds).
If an existing motor driven Chexit device needs a replacement module of the same non-standard release delay (e.g., 2 seconds, 10 seconds, infinite), that module may be ordered from the factory by description.
A release delay of more than 15 seconds no longer requires a letter of authorization by Von Duprin from the local AHJ prior to ordering. The local AHJ must approve the release delay device of more than 15 seconds.
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES
OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO
YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE
USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS
MADE AVAILABLE THROUGH THIS SITE.